1702 Charge Oil Pump for 5 litre container

1702 CHARGE - Oil Pump

Includes adaptor kit to fit most 5L containers. Pump is a piston type with high pressure design to operate at pressures to 250 PSI. Connect direct to compressor under pressure.

When using on refrigeration systems, it charges without pumping the compressor down thus reducing charging time by over 70%.  Pump is connected to compressor by refrigerant charging line or copper tubing from 1/4” male fitting.
Provides the professional touch since oil can be accurately measured into the compressor without having to pour it from the can. Fits all popular brands of refrigeration oil & is suitable for use with alkybenzene and POE oils. Similar to Stirrup Pump operation.

1751  CHANGE-OIL PUMP

1751 Change-Oil Pump is a companion to the famous Imperial-Thermal Engineering 1700 Charge-Oil Pump. It has been designed for use in pumping oil from refrigeration compressors, marine engines, and other equipment where it is impossible to drain oil in the conventional manner. Removing oil from refrigeration compressors before dehydrating with vacuum is a necessity. Suction tube is 5/16” OD semi-rigid plastic, 15” long. Suction tubes up to 60” long can be used if necessary.
Will not pump under pressure. Pumping capacity about 10 strokes per Litre. "GO TO PAGE"